Catalog
Loading...
Pas encore de produit ajouté
par Mediakwest
Read MoreThe world's first full spectrum compact light
Read MoreSubcategories
The adapter converts a 5/8” (16 mm) female attachment into a 5/8” (16 mm) spigot.
Clamping range encompasses pipe from 20 mm to 55 mm diameter.
Two steel plates to connect rails end to end. Hardware included. Not suitable for moving rails.
Wall bracket for up to 3 parallel rails. Clamps FF3601 not included and have to be ordered separately. Hardware to install bracket to the wall is not included. Maximum load depends on mounting conditions.
Bracket to attach rails directly to the ceiling. Hardware to install the bracket to the ceiling is not included. Maximum load depends on mounting conditions.
Clamps FF3601 not included and have to be ordered separately. Hardware to install the bracket to the wall is not included. Maximum load depends on mounting conditions.
Bracket to suspend rails from ceiling with steel wires. Wire is not included.
Made to support electrical cable from 8 to 16 mm diameter (3/8" to 5/8") on rail type 60. Cable held by standard cable tie, not supplied.
Mounted on a taut 8 mm (5/16") diameter steel wire to support up to 40 mm x 40 mm (1 9/16" x 1 9/16") for distances up to 12 m (40').
Made to support up to 3 electrical cables from 8 to 16 mm diameter (3/8" to 5/8") on rail type 60. Cables held by standard cable tie, not supplied.
Kit of 5 steel carriages with ball bearings for heavy curtains.
Spring-loaded brake pad holds carriage in position. To release the brake pull down on wire with operating pole.
Use at both ends of the curtain to secure the curtain end position. Locking cup is also used to pull carriage along rail.
Steel carriage with bearing wheels. Place one towing carriage every 25 carriages type FF3227K or FF3727C.
Spring-loaded brake pad holds carriage in position. To release the brake pull down on wire with operating pole. Universal head with 1-1/8” and 5/8”.
Double carriage with spring-loaded brake pads on each section. To release the brake pull down on wire with operating pole. Used to connect a mobile rail to a fixed rail.
The adapter converts a 5/8” (16 mm) spigot into a 1 1/8” female attachment.
Female – male adapter 5/8” spigot to 1 1/8 female.
The Arm is used to suspend up to 6 lighting fixtures from a single pantograph or drop arm.
Used between luminaires and suspension for extra safety.
The TOP 2C and TOP 4C are manual operated friction pantographs for single loads of up to 18 kg (39.7 Lbs). TOP 2C extends 2 m (6’-6”), TOP 4C 3.8 m (12’-5”).
The TOP 2C and TOP 4C are manual operated friction pantographs for single loads of up to 18 kg (39.7 Lbs). TOP 2C extends 2 m (6’-6”), TOP 4C 3.8 m (12’-5”).
One side of the carriage can be removed to attach or detach the carriage to/from the IFF Rail 60. Spring-loaded brake pad holds carriage in position.
One side of the carriage can be removed to attach or detach the carriage to/from the IFF Rail 80. Spring-loaded brake pad holds carriage in position.
Rail clamp kit for IFF brackets. The kit includes (2) clamps and hardware to mount the clamps to IFF brackets. (M8 nuts and M8 x 25 bolts)