Pas encore de produit ajouté
A wide range of mounting arms and adapters to satisfy every positioning requirement.
A wide range of mounting arms and adapters to satisfy every positioning requirement.
A wide range of mounting arms and adapters to satisfy every positioning requirement.
A wide range of mounting arms and adapters to satisfy every positioning requirement.
Barndoors are fundamental to shape and direct the beam of light. The design of Quartzcolor barndoors allows perfect control and direction with sharp edges.
Barndoors are fundamental to shape and direct the beam of light. The design of Quartzcolor barndoors allows perfect control and direction with sharp edges.
Barndoors are fundamental to shape and direct the beam of light. The design of Quartzcolor barndoors allows perfect control and direction with sharp edges.
Barndoors are fundamental to shape and direct the beam of light. The design of Quartzcolor barndoors allows perfect control and direction with sharp edges.
Barndoors are fundamental to shape and direct the beam of light. The design of Quartzcolor barndoors allows perfect control and direction with sharp edges.
Barndoors are fundamental to shape and direct the beam of light. The design of Quartzcolor barndoors allows perfect control and direction with sharp edges.
Barndoors are fundamental to shape and direct the beam of light. The design of Quartzcolor barndoors allows perfect control and direction with sharp edges.
The ceiling-mounted Dual Lift configuration is ideal for supporting long batten pipes for TV, theatrical and auditorium applications. This configuration uses two accessories – the double rope diverter pulley and the lighting circuit distributor. Travel is up to 10m (32ft), while the underhanging batten pipe can be between 3m (9’10”) and 5m (16ft) long,...
The self-climbing configuration is one of the most common uses of the ACTA 20, as well as the easiest and fastest to install. The ropes exit the unit vertically upwards and attach to the studio ceiling rig via a pre-mounted rail. Travel is up to 10 m (32 ft), while the under-hanging batten pipe can be up to 3m (9’10”) long, with up to 6 lighting circuits...
Self-Climbing lighting hoist with up to 4.5 m (10') pipe and up to 9 lighting circuits. Max drop up to 13 m. Onboard motor self-climbing hoist to raise and lower lighting fixtures. Provides easy and fast access to install and service studio lighting fixtures.
FF3614 can be easily attached to I beams. With the brackets FF3601, FF3605 or FF3606 you can suspend rails, pipes or IPE80.
A wide range of mounting arms and adapters to satisfy every positioning requirement.
Adjustable bracket allows fixing to uneven ceilings, scaffolding or “I” Beam structures. Extendable from 9 to 13 cm (3,5” to 5”) and inclinable from 0 to 90°.
Two steel plates to connect rails end to end. Hardware included. Not suitable for moving rails.
Two steel plates to connect rails end to end. Hardware included. Not suitable for moving rails.
Two steel plates to connect straight rails end to end. Hardware included.
Two steel plates to connect 2 curved rails or a curved rail and a straight rail end to end. Hardware included.
4 sections-3 risers stand, 1004BAC stands connect to each other for easy transportation.Air cushioning protects fingers and mounted equipment, spigot with 3/8'' thread, supplied with removable 1/4-20'' thread.Wide footprint 106 cm for great stability.Payload up to 9 kg.
3 sections-2 risers stand, 1005BAC stands connect to each other for easy transportation.Air cushioning protects fingers and mounted equipment, removable reversible spigot with 1/4'' and 3/8'' thread.Payload up to 10 kg.
4 sections-3 risers stand with a payload of up to 5 kg, 16 mm spigot, black.Excellent protection against corrosion and wear is ensured by aluminium anodisation.
4 sections-3 risers stand with a payload of up to 5 kg, 16 mm spigot, black.Excellent protection against corrosion and wear is ensured by aluminium anodisation.