Pas encore de produit ajouté
par Mediakwest
Read MoreThe world's first full spectrum compact light
Read MoreIFF Pole Operated Pantograph suspends and positions luminaires with loads of up to 40kg (88 Lbs). It is a versatile suspension unit for small, medium and large studios
IFF Pole Operated Pantograph suspends and positions luminaires with loads of up to 40kg (88 Lbs). It is a versatile suspension unit for small, medium and large studios
Mount the end stops in the holes at the end of each rail to prevent carriages leaving the rail and to prevent moving rails leaving their carriages.
Mount the end stops in the holes at the end of each rail to prevent carriages leaving the rail.
End stop for trailing cable system. Mount in the holes at the end of the rail to prevent carriages leaving the rail and for strain relief of the power cable.
Adjustable bracket to mount IFF rails, pipes or steel beams onto uneven ceiling structures.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
To compensate for differences in ceiling height. Adjustable from 13 to 20 cm (5” to 8”).
Female – male adapter 5/8” spigot to 1 1/8 female.
The adapter converts a 5/8” (16 mm) spigot into a 1 1/8” female attachment.
Use clamps FF3601 for mounting onto IFF rails or FF3605 for pipes
Bracket to mount IFF rails to steel beams from IPE 120 to IPE 240.
The TOP 2C and TOP 4C are manual operated friction pantographs for single loads of up to 18 kg (39.7 Lbs). TOP 2C extends 2 m (6’-6”), TOP 4C 3.8 m (12’-5”).
The TOP 2C and TOP 4C are manual operated friction pantographs for single loads of up to 18 kg (39.7 Lbs). TOP 2C extends 2 m (6’-6”), TOP 4C 3.8 m (12’-5”).
Steel carriage with bearing wheels. Place one towing carriage every 25 carriages type FF3227K or FF3727C.
Spring-loaded brake pad holds carriage in position. To release the brake pull down on wire with operating pole. Universal head with 1-1/8” and 5/8”.
Clamping range encompasses pipe from 20 mm to 55 mm diameter.
Made to support electrical cable from 8 to 16 mm diameter (3/8" to 5/8") on rail type 60. Cable held by standard cable tie, not supplied.
Lighting and Scenery Hoist with up to 18m (49’) long traveling connector strip for up to 72 lighting circuits and/or up to 21m lighting bar. Max drop up to 18 m, standard max load up to 1100 kg.
Manual, pole operated pantograph for single loads of up to 40kg (88Lbs).The self-locking drum winch mechanism with two steel cables support loads under static and dynamic conditions. The specially designed sheet metal scissors add stability and are furnished with cable clips for power cables.
Low voltage 24 VDC - 4A motorized carriage for lateral movements with friction for manual operation. Can be used stand alone or as locomotive for IFF pantographs and drop arms.