Pas encore de produit ajouté
The Studio Motorized Pantograph provides a very flexible system of suspending luminaires of up to 40kg with ease and precision.
Switch for single cyclorama Rail Type 60 to connect parking rails or feeding rails to the main curtain rail. Closed loop curtain systems require switches for inserting or removing curtains for maintenance. (To order te left version use code FF3767SX).
Switch for single cyclorama Rail Type 50 to connect parking rails or feeding rails to the main curtain rail. Closed loop curtain systems require switches for inserting or removing curtains for maintenance. (to order the left version use code FF3757SX).
Switch for double cyclorama Rail Type 60 system. To connect parking rails or feeding rails to the main curtain rail system. Closed loop curtain systems require switches for inserting or removing curtains for maintenance
Switch for double cyclorama Rail Type 50 system. To connect parking rails or feeding rails to the main curtain rail system. Closed loop curtain systems require switches for inserting or removing curtains for maintenance.
Switch for triple cyclorama Rail Type 50 system. To connect parking rails or feeding rails to the main curtain rail system. Closed loop curtain systems require switches for inserting or removing curtains for maintenance.
Switch for triple cyclorama Rail Type 60 system. To connect parking rails or feeding rails to the main curtain rail system. Closed loop curtain systems require switches for inserting or removing curtains for maintenance.
Extendable bracket with a 1-1/8” spigot on the top and a 1-1/8” female attachment on the bottom; can be mounted on carriages or fixed clamps. Extension position is locked by a tightening nut.
Extendable bracket with a 1-1/8” spigot on the top and a 1-1/8” female attachment on the bottom; can be mounted on carriages or fixed clamps. Extension position is locked by tightening nut.
Extendable bracket with a 1-1/8” spigot on the top and a 1-1/8” female attachment on the bottom; can be mounted on carriages or fixed clamps. Extension position is locked by tightening nut.
Extendable bracket with a 1-1/8” spigot on the top and a 1-1/8” female attachment on the bottom; can be mounted on carriages or fixed clamps. Extension position is locked by tightening nut.
Extendable bracket with a 1-1/8” spigot on the top and a 1-1/8” female attachment on the bottom; can be mounted on carriages or fixed clamps. Extension position is locked by tightening nut.
Extendable bracket with a 1-1/8” spigot on the top and a 1-1/8” female attachment on the bottom; can be mounted on carriages or fixed clamps. Extension position is locked by tightening nut.
Extendable bracket with a 1-1/8” spigot on the top and a 1-1/8” female attachment on the bottom; can be mounted on carriages or fixed clamps. Extension position is locked by tightening nut.
Hardware to attach the Rod onto FF3630 and FF3631 is included.
Steel carriages with ball bearings to be mounted every 25 carriages art. FF3720C or FF3723C. This carriage helps pulling the curtain.
Steel carriages with ball bearings for pulling cyclorama into position; should be mounted at both ends of the cyclorama.
Wall bracket for 2 parallel rails. Clamps FF3601 not included and have to be ordered separately. Hardware to install bracket to the wall is not included. Maximum load depends on mounting conditions.
Wall bracket for up to 3 parallel rails. Clamps FF3601 not included and have to be ordered separately. Hardware to install bracket to the wall is not included. Maximum load depends on mounting conditions.
Clamps FF3601 not included and have to be ordered separately. Hardware to install the bracket to the wall is not included. Maximum load depends on mounting conditions.
Mounted on a taut 8 mm (5/16") diameter steel wire to support up to 40 mm x 40 mm (1 9/16" x 1 9/16") for distances up to 12 m (40').