Pas encore de produit ajouté
List of products by manufacturer IFF
-
IFF FF3808Y50
DUO P.O. PantographIFF Pole Operated Pantograph suspends and positions luminaires with loads of up to 40kg (88 Lbs). It is a versatile suspension unit for small, medium and large studios
-
IFF FF3808Y60
DUO P.O. PantographIFF Pole Operated Pantograph suspends and positions luminaires with loads of up to 40kg (88 Lbs). It is a versatile suspension unit for small, medium and large studios
-
IFF FF3660
End StopMount the end stops in the holes at the end of each rail to prevent carriages leaving the rail and to prevent moving rails leaving their carriages.
-
IFF FF3661
End stop (kit of 4)Mount the end stops in the holes at the end of each rail to prevent carriages leaving the rail.
-
IFF FF3664
End stop with 4 cable tiesEnd stop for trailing cable system. Mount in the holes at the end of the rail to prevent carriages leaving the rail and for strain relief of the power cable.
-
IFF FF3665
End stop with flat cable holderAdjustable bracket to mount IFF rails, pipes or steel beams onto uneven ceiling structures.
-
IFF FF3625Y100
Extension bracket 100 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y015
Extension bracket 15 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y150
Extension bracket 150 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3620
Extension bracket 35 cm lengthExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y050
Extension bracket 50 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3624
Extension bracket 65 cm lengthExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y075
Extension bracket 75 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3616
Extension bracket for variable heightsTo compensate for differences in ceiling height. Adjustable from 13 to 20 cm (5” to 8”).
-
IFF FF3260
Female - male adapter 5/8" spigot to 1 1/8 femaleFemale – male adapter 5/8” spigot to 1 1/8 female.
-
IFF FF3257
Female adapter 5/8" to 1 1/8"The adapter converts a 5/8” (16 mm) spigot into a 1 1/8” female attachment.
-
IFF FF3869
Female mounting point 1 1/8"Use clamps FF3601 for mounting onto IFF rails or FF3605 for pipes
-
IFF FF3674
Flat Adapter Bracket for IFF rail systems to "I" beamsBracket to mount IFF rails to steel beams from IPE 120 to IPE 240.
-
IFF FF3512
Friction Pantograph - Top 2CThe TOP 2C and TOP 4C are manual operated friction pantographs for single loads of up to 18 kg (39.7 Lbs). TOP 2C extends 2 m (6’-6”), TOP 4C 3.8 m (12’-5”).
-
IFF FF3514
Friction Pantograph - Top 4CThe TOP 2C and TOP 4C are manual operated friction pantographs for single loads of up to 18 kg (39.7 Lbs). TOP 2C extends 2 m (6’-6”), TOP 4C 3.8 m (12’-5”).
-
-
IFF FF3229T
Heavy duty curtain carriage with cup for pulling curtainSteel carriage with bearing wheels. Place one towing carriage every 25 carriages type FF3227K or FF3727C.
-
IFF FF3231D
Heavy-duty carriage with brake and universal headSpring-loaded brake pad holds carriage in position. To release the brake pull down on wire with operating pole. Universal head with 1-1/8” and 5/8”.
-
IFF C100
Junior pipe clamp with 28 mm socketClamping range encompasses pipe from 20 mm to 55 mm diameter.
-
IFF FF3226C
Kit of 5 cable carriages with bearingMade to support electrical cable from 8 to 16 mm diameter (3/8" to 5/8") on rail type 60. Cable held by standard cable tie, not supplied.
-
IFF FF3771
Line Shaft HoistLighting and Scenery Hoist with up to 18m (49’) long traveling connector strip for up to 72 lighting circuits and/or up to 21m lighting bar. Max drop up to 18 m, standard max load up to 1100 kg.
-
IFF FF3800
MONO P.O. PantographManual, pole operated pantograph for single loads of up to 40kg (88Lbs).The self-locking drum winch mechanism with two steel cables support loads under static and dynamic conditions. The specially designed sheet metal scissors add stability and are furnished with cable clips for power cables.
-
IFF FF3732S
Motorized carriage for IPE 100Low voltage 24 VDC - 4A motorized carriage for lateral movements with friction for manual operation. Can be used stand alone or as locomotive for IFF pantographs and drop arms.