Pas encore de produit ajouté
List of products by manufacturer Light & Motion
-
Light & Motion 800-0286-A
1/4 - 20 AdaptorFasten your Stella to a ¼-20 screw found on tripods, clamps, etc. Compatible Lights: Stella 1000, Stella 2000, Stella Pro 5000
-
Light & Motion 800-0302-A
25° Fresnel Lens, 82mmLightweight 25° optical Fresnel modifies the Stella’s beam into a precise spot ideal for isolating subjects. Press-on design allows optic to be fixed or removed in seconds for rapid beam adjustments. Compatible Lights: Stella 2000, Stella Pro 5000
-
Light & Motion 800-0304-A
25° Fresnel, 50mmLightweight 25° optical Fresnel modifies the Stella’s beam into a precise spot ideal for isolating subjects. Snap-on design allows optic to be fixed or removed in seconds for rapid beam adjustments. Includes lanyard to tether lens to D-Ring on mount base when detached. Compatible Lights: Stella 1000
-
Light & Motion 800-0341-A
3 CTO Set (Full, 1/2, 1/4) DMThe Light & Motion Stella CTO Filter Set allows quick repeatable CCT change. The CTO glass filters are mounted directly to the STella Pro EL. They can also be used with the Barn Doors Modifier, 82mm and the other DM modifiers via the Barn Doors or the 82mm Mofifiers via the El Modifier interface.PRODUCT HIGHLIGHTSRepeatable Tungsten CTOCan be used...
-
Light & Motion 800-0344-A
3" Gel Frame (Secured With 3" Speed Ring Gel Holder)3" Gel Frame that secures Gels. Stella 3" Speed Ring Gel Holder (required). Compatible Lights: Stella 2000, Stella Pro 5000
-
Light & Motion 800-0283-B
3" Speed Ring Gel Holder, 82mm (Incl 3" Gel Frame)Attaches securely to the Stella bezel for use with Chimera softbox speed ring adapters or 3x3” hard gels. Includes 3" Gel Frame. Compatible Lights: Stella 2000, Stella Pro 5000
-
Light & Motion 804-0146-A
3-Cell Li-ion Battery PackExtend run-time of the Stella light when used with Light/Battery Connector Cable (not included). Increases run-time of the Stella 1000 by 122 minutes and the Stella 2000 by 65 minutes (on high). Can be utilized to power the light as well as recharge Stella’s internal battery. Integrated clip allows attachment to belt or pocket. Velcro battery strap...
-
Light & Motion 800-0337-A
50 Degree Optic DMThe Light & Motion Stella 50-degree Optic DM narrows the beam of the Stella Pro and Stella 2000 lights from 120-degree to 50-degrees. It provides a smooth beam with gentle fall off. (It easily attaches directly to the Stella Pro 8000 EL or can be) It attaches directly to the "Barn Doors Light Modifier, with Direct Mount Interface" (800-0284-B) to use...
-
Light & Motion 800-0285-A
50° Focus Optic Lens, 82mmSilicone 50° optic gives Stella an evenly dispersed beam with gentle light fall off. Excellent for concentrating light in a specific area and key lighting subjects. Silicone optic can be separated from retainer and used as a 3” speed ring holder for 3" Chimera softbox adapters or 3x3” hard gels. Compatible Lights: Stella 2000, Stella Pro 5000
-
Light & Motion 804-0065-B
6-Cell Li-ion Battery PackExtend run-time of theStella light when used in conjunction with Light/Battery Connector Cable (not included). Increases run-time of the Stella 1000 by 214 minutes and the Stella 2000 by 115 minutes (on high). Can be utilized to power the light as well as recharge Stella’s internal battery. Velcro battery strap included to secure on tripod leg, boom, etc....
-
Light & Motion 800-0287-A
Bar/Pole Mount, Stella Camera LightsSecure the Stella to a boom, bar, etc. Non-slip adjustable design allows mounting to various diameters. Compatible Lights: Stella 1000, Stella 2000
-
Light & Motion 800-0308-A
Barn Doors Light Modifier (Stella 1000)Utilize barn doors to concentrate the light source and prevent spillover light. Robust snap-on design quickly and securely mounts to the Stella bezel. Compatible Lights: Stella 1000
-
Light & Motion 800-0284-B
Barn Doors Light Modifier, 82mm w/DMUtilize barn doors to concentrate the light source and prevent spillover light that could be distracting to a live audience. Robust press-on design mounts quickly and securely to the Stella bezel. Compatible Lights: Stella 2000, Stella Pro 5000
-
Light & Motion 800-0291-A
C-Stand MountSecure your Stella to a C-Stand with this robust mount. Includes thumb screw for quick attachment to a baby pin. Compatible Lights: Stella 1000, Stella 2000, Stella Pro 5000
-
Light & Motion 800-0301-A
Car CableRecharge the Stella with a vehicle’s 12V plug-in power receptacle. Compatible Lights: Stella 1000, Stella 2000
-
Light & Motion 800-0300-A
Car Cable ProRecharge the Stella Pro with a vehicle’s 12V plug-in power receptacle. Compatible Lights: Stella Pro 5000
-
Light & Motion 804-0216-A
Cold Shoe MountAttach to a camera's cold shoe mount or into a standard 1/4-20 tripod screw. Stella lights require 1/4-20 Adaptor (800-0286-A), also compatible with Sidekick lights.
-
Light & Motion 800-0305-A
Diffuser, 50mmSnap-on design securely attaches to Stella and provides softened light ideal for interviews and subdued fill light. Includes lanyard to tether to D-Ring on mount base when detached. Compatible Lights: Stella 1000
-
Light & Motion 800-0335-A
Dome Port - DMThe Dome Port DM creates a wide and diffused light. It easily attaches directly to the Stella Pro 8000 EL or can be combined with the "Barn Doors Light Modifier, with Direct Mount Interface" (800-0284-B) to use with the Stella Pro RF, Stella Pro, and Stella 2000 lights
-
Light & Motion 800-0321-A
Dome Port AccessoryThe Dome Port creates a wide and diffused light. It easily secures on the Stella 1000 by replacing the native bezel.PRODUCT HIGHLIGHTSWidens the Beam AngleDiffuses the Light OutputSecurely screws on to the light body
-
Light & Motion 800-0289-A
DTAP CableConnect your Stella to an external battery with DTAP connection to both power and recharge the light. Compatible Lights: Stella 1000, Stella 2000
-
Light & Motion 800-0288-A
DTAP Cable ProConnect your Stella Pro to an external battery with DTAP connection to both power and recharge the light. Compatible Lights: Stella Pro 5000
-
Light & Motion 800-0343-A
EL Modifier InterfaceThe Light & Motion Stella EL Modifier Interface allows the STella Pro EL light to be used with the Stella 82 mm modifiers: the Barn Doors Modifier 82 mm, the STtella Pro 25-degree Fresnel Lens, and the STella Speedring Gel Holder. The Stella EL Modifier Interface attaches to the Stella Pro 8000 EL bezel to support these "press on" 82mm...
-
Light & Motion 800-0325-A
EL Remote Control (For RF & EL Lights)EL (Elinchrom) Remote Control Unit for Light & Motion Stella Pro Lights RF. 2.4 GHz, 20 channels, 4 groups and has a range up to 200m/606feet.Features:• Compatible with Stella Pro Lights with RF Control• Built-in Elinchrom Wireless Communication Transceiver• 2.4 GHz Frequency• 20 Channels, 4 groups• Distance Range 200m/606 Feet• Built in rechargeable...
-
Light & Motion 800-0210-A
EU IEC320 Power CableConvert the Stella Pro's external power supply to EU outlet standards. Compatible Charger: External Power Supply 24V 60W (P/N 800-0272-A)
-
Light & Motion 800-0271-A
External Power Supply 12V 30W (US/UK/EU/AUS)Replacement power supply for select Stella lights. Includes adapters for US, UK, EU, and AUS outlet standards. Compatible Lights: Stella 1000, Stella 2000
-
Light & Motion 800-0316-A
External Power Supply 24V 140W For Stella 10000c (US/JP) (PSE...Replacement power supply that includes both charger and US dongle. Compatible Lights: Stella Pro 10000c
-
Light & Motion 800-0272-A
External Power Supply 24V 60W (US/JP) (PSE Certified)Replacement power supply that includes both charger and dongle. Compatible Lights: Stella Pro 5000, 6000, 7000, 8000