Catalog
Loading...
Pas encore de produit ajouté
par Mediakwest
Read MoreThe world's first full spectrum compact light
Read MoreSubcategories
To compensate for differences in ceiling height. Adjustable from 13 to 20 cm (5” to 8”).
Wall bracket for 2 parallel rails. Clamps FF3601 not included and have to be ordered separately. Hardware to install bracket to the wall is not included. Maximum load depends on mounting conditions.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Extension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
Holds up to 3 cyclorama rails when combined with extension brackets like FF3620 or FF3616 or FF3214C.
Holds up to 2 cyclorama rails when combined with extension brackets like FF3620 or FF3616 or FF3214C, etc.
The Base plate can be used to built your own bracket to guarantee a precise fit with the IFF standard brackets.
For adjustable hanging points for rails or pipes use the rail bracket FF3631 together with FF3632 threaded rod and FF3630 ceiling bracket. Height-adjustment of 100mm is possible.
Hardware to attach the Rod onto FF3630 and FF3631 is included.
Mount the end stops in the holes at the end of each rail to prevent carriages leaving the rail and to prevent moving rails leaving their carriages.
Mount the end stops in the holes at the end of each rail to prevent carriages leaving the rail.
End stop for trailing cable system. Mount in the holes at the end of the rail to prevent carriages leaving the rail and for strain relief of the power cable.
Adjustable bracket to mount IFF rails, pipes or steel beams onto uneven ceiling structures.
Two steel plates to connect rails end to end. Hardware included. Not suitable for moving rails.
Bracket with clamps to connect two rails parallel or in a right angle.
Two steel plates to connect straight rails end to end. Hardware included.
Two steel plates to connect 2 curved rails or a curved rail and a straight rail end to end. Hardware included.
Bracket to mount IFF rails to steel beams from IPE 120 to IPE 240.
Double carriage with 6 bearing wheels each. Upper carriage with twist lock, lower carriage with friction brake.
Carriage with clamp for pipes up to 52 mm (2”) diameter; with 6 bearing wheels and twist lock.
One side of the carriage can be removed to attach or detach the carriage to/from the IFF Rail 80 or IPE80 beam. Universal head with 1-1/8” and 5/8” female and 5/8” male attachment.
One side of the carriage can be removed to attach or detach the carriage to/from the IPE100 beam. Universal head with 1-1/8” and 5/8” female and 5/8” male attachment.