Catalogue
Chargement...
Pas encore de produit ajouté
Sous-catégories
These aluminium rails are designed for light weight application, Cyclorama and low ceiling studios. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required.
These aluminium rails are designed for light weight application, Cyclorama and low ceiling studios. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required.
These aluminium rails are designed for light weight application, Cyclorama and low ceiling studios. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required.
These aluminium rails are designed for light weight application, Cyclorama and low ceiling studios. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required.
These aluminium rails are designed for light weight application, Cyclorama and low ceiling studios. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required.
These aluminium rails are designed for heavy-duty applications. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required
These aluminium rails are designed for heavy-duty applications. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required
These aluminium rails are designed for heavy-duty applications. Rail systems in each length and shape are possible by connecting 2 or more standard rails. End stops at each rail end are required
Designed to suspend rails directly from ceilings. Use extension rod FF3632 to drop the rail system to the required height Clamps FF3601 not included and have to be ordered separately. Hardware to install the bracket to the ceiling is not included. Maximum load is dependant on mounting conditions.
Manual, pole operated pantograph for single loads of up to 40kg (88Lbs).The self-locking drum winch mechanism with two steel cables support loads under static and dynamic conditions. The specially designed sheet metal scissors add stability and are furnished with cable clips for power cables.
The ceiling-mounted Dual Lift configuration is ideal for supporting long batten pipes for TV, theatrical and auditorium applications. This configuration uses two accessories – the double rope diverter pulley and the lighting circuit distributor. Travel is up to 10m (32ft), while the underhanging batten pipe can be between 3m (9’10”) and 5m (16ft) long,...
The self-climbing configuration is one of the most common uses of the ACTA 20, as well as the easiest and fastest to install. The ropes exit the unit vertically upwards and attach to the studio ceiling rig via a pre-mounted rail. Travel is up to 10 m (32 ft), while the under-hanging batten pipe can be up to 3m (9’10”) long, with up to 6 lighting circuits...
Self-Climbing lighting hoist with up to 4.5 m (10') pipe and up to 9 lighting circuits. Max drop up to 13 m. Onboard motor self-climbing hoist to raise and lower lighting fixtures. Provides easy and fast access to install and service studio lighting fixtures.
Hardware for installation included.(4 sets of M8 x 60 bolts, nuts and washersPipe clamp with hardware to mount pipes to brackets.
Connector Strip: up to 6 m (19'-8")Lighting bar: up to 7.3 m (24’)Travel: up to 14 m (46’)Lighting circuits: up to 12Cat 5: 1 / 2Video and audio connections optionalAdjustable operating limitsOverload detectionSlack wire detectionOver travel limitsThermal motor protection UL / CSA / CE /BGVC1
Connector Strip: up to 20 m (65'-8")Travel: up to 14 m (46’)Lighting circuits: up to 6Emergency lighting circuit: optionalAdjustable operating limitsOverload detectionSlack wire detectionOver travel limitsThermal motor protectionUL / CSA / CE / BGVC1
Modular and easy to installAvailable with connector Strip, Truss or Batten pipe with length from 8 to 21m (26’ to 68’)