Catalogue
Chargement...
Pas encore de produit ajouté
Sous-catégories
One side of the carriage can be removed to attach or detach the carriage to/from the IFF Rail 80 or IPE80 beam. Universal head with 1-1/8” and 5/8” female and 5/8” male attachment.
One side of the carriage can be removed to attach or detach the carriage to/from the IPE100 beam. Universal head with 1-1/8” and 5/8” female and 5/8” male attachment.
One side of the carriage can be removed to attach or detach the carriage to/from the IPE120 beam. Universal head with 1-1/8” and 5/8” female and 5/8” male attachment.
Twist lock holds carriage in position. Use operating pole to open or release the twist lock.
Twist lock holds carriage in position. Use operating pole to open or release the twist lock. Universal head with 1-1/8” and 5/8” female and 5/8” male attachment.
Carriage for pipes. Spring-loaded brake pad holds carriage in position. To release the brake pull down on wire with operating pole.
Carriage for pipes. Spring-loaded brake pad holds carriage in position. To release the brake pull down on wire with operating pole. Universal head with 1-1/8” and 5/8” female and 5/8” male attachment.
Carriage for pipes. Spring-loaded brake pad holds carriage in position. To release the brake pull down on wire with operating pole.
One side of the carriage can be removed to attach or detach the carriage to/from the Rail 80. Rail carriage with 1-1/8” female attachment. Twist lock holds carriage in position. Use operating pole to open or release the twist lock.
One side of the carriage can be removed to attach or detach the carriage to/from the IPE 100. Rail carriage with 1-1/8” female attachment. Twist lock holds carriage in position. Use operating pole to open or release the twist lock.
One side of the carriage can be removed to attach or detach the carriage to/from the IPE 120. Rail carriage with 1-1/8” female attachment. Twist lock holds carriage in position. Use operating pole to open or release the twist lock.
Double carriage used to connect moving Rail 60 to a fixed Rail 80; upper carriage with 6 bearing wheels and twist lock lower carriage with 4 bearing wheels and friction brake.
Double clamp to connect 2 pipes parallel or in a right angle.
Pipe carriage with twist lock, complete with pipe clamp for pipes from 32 mm to 52 mm (1 1/4" to 2").
Made to support up to 3 electrical cables from 8 to 16 mm diameter (3/8" to 5/8") on Rail type 80. Cables held by standard cable tie, not supplied.
Twist lock holds carriage in position. Use operating pole to open or release the twist lock. Receptacle not included.
Steel carriages with ball bearings for curtains up to 9 m height. Recommended distance between carriages for ideal curtain support: 25-30 cm.
Steel carriages with ball bearings to be mounted every 25 carriages art. FF3720C or FF3723C. This carriage helps pulling the curtain.
Steel carriages with bearing wheels, used to suspend rigid scenaries or wood panels. The clamp can hold object form 6 mm to 100 mm thick.
Steel carriages with ball bearings for curtains over 9 m (29 ft) height. Recommended distance between carriages for ideal curtain support: 25-30 cm.
Steel carriages with ball bearings for pulling cyclorama into position; should be mounted at both ends of the cyclorama.
Low voltage 24 VDC - 4A motorized carriage for lateral movements with friction for manual operation. Can be used stand alone or as locomotive for IFF pantographs and drop arms
Low voltage 24 VDC - 4A motorized carriage for lateral movements with friction for manual operation. Can be used stand alone or as locomotive for IFF pantographs and drop arms.
Low voltage 24 VDC - 4A motorized carriage for lateral movements with friction for manual operation. Can be used stand alone or as locomotive for IFF pantographs and drop arms.
Tower to tension cyclorama curtains evenly. For curtain systems above 5,0 m (16 feet) the use of towers are strongly recommended.
Switch for triple cyclorama Rail Type 50 system. To connect parking rails or feeding rails to the main curtain rail system. Closed loop curtain systems require switches for inserting or removing curtains for maintenance.
Switch for double cyclorama Rail Type 50 system. To connect parking rails or feeding rails to the main curtain rail system. Closed loop curtain systems require switches for inserting or removing curtains for maintenance.
Switch for single cyclorama Rail Type 50 to connect parking rails or feeding rails to the main curtain rail. Closed loop curtain systems require switches for inserting or removing curtains for maintenance. (to order the left version use code FF3757SX).