Système de Rail Supérieur Il y a 142 produits
Sous-catégories
-
IFF FF3612
Adjustable bracketAdjustable bracket allows fixing to uneven ceilings, scaffolding or “I” Beam structures. Extendable from 9 to 13 cm (3,5” to 5”) and inclinable from 0 to 90°.
-
IFF FF3614
Adapter bracket for "I" beam to IFF rail systemFF3614 can be easily attached to I beams. With the brackets FF3601, FF3605 or FF3606 you can suspend rails, pipes or IPE80.
-
IFF FF3616
Extension bracket for variable heightsTo compensate for differences in ceiling height. Adjustable from 13 to 20 cm (5” to 8”).
-
IFF FF3618
Wall bracket for 2 railsWall bracket for 2 parallel rails. Clamps FF3601 not included and have to be ordered separately. Hardware to install bracket to the wall is not included. Maximum load depends on mounting conditions.
-
IFF FF3620
Extension bracket 35 cm lengthExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3624
Extension bracket 65 cm lengthExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y015
Extension bracket 15 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y050
Extension bracket 50 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y075
Extension bracket 75 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y100
Extension bracket 100 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3625Y150
Extension bracket 150 cmExtension bracket to suspend IFF rails, pipes or steel beam to ceilings with height differences.
-
IFF FF3626
Spacer bracket for up to 3 railsHolds up to 3 cyclorama rails when combined with extension brackets like FF3620 or FF3616 or FF3214C.
-
IFF FF3627
Spacer for 2 railsHolds up to 2 cyclorama rails when combined with extension brackets like FF3620 or FF3616 or FF3214C, etc.
-
IFF FF3628
Base plateThe Base plate can be used to built your own bracket to guarantee a precise fit with the IFF standard brackets.
-
IFF FF3631
Rail bracket for threaded rods (M12)For adjustable hanging points for rails or pipes use the rail bracket FF3631 together with FF3632 threaded rod and FF3630 ceiling bracket. Height-adjustment of 100mm is possible.
-
IFF FF3632
Threaded rod (M12) 1 m longHardware to attach the Rod onto FF3630 and FF3631 is included.
-
IFF FF3660
End StopMount the end stops in the holes at the end of each rail to prevent carriages leaving the rail and to prevent moving rails leaving their carriages.
-
IFF FF3661
End stop (kit of 4)Mount the end stops in the holes at the end of each rail to prevent carriages leaving the rail.
-
IFF FF3664
End stop with 4 cable tiesEnd stop for trailing cable system. Mount in the holes at the end of the rail to prevent carriages leaving the rail and for strain relief of the power cable.
-
IFF FF3665
End stop with flat cable holderAdjustable bracket to mount IFF rails, pipes or steel beams onto uneven ceiling structures.
-
IFF FF3670
Alignment connectorTwo steel plates to connect rails end to end. Hardware included. Not suitable for moving rails.
-
IFF FF3672
Double bracket for rail crossingBracket with clamps to connect two rails parallel or in a right angle.
-
IFF FF3673
Alignment connectorTwo steel plates to connect straight rails end to end. Hardware included.
-
IFF FF3673C
Alignment connector for curved railsTwo steel plates to connect 2 curved rails or a curved rail and a straight rail end to end. Hardware included.
-
IFF FF3674
Flat Adapter Bracket for IFF rail systems to "I" beamsBracket to mount IFF rails to steel beams from IPE 120 to IPE 240.
-
IFF FF3700
Double carriage for Rail 80Double carriage with 6 bearing wheels each. Upper carriage with twist lock, lower carriage with friction brake.
-
-
IFF FF3706
Carriage for cross pipesCarriage with clamp for pipes up to 52 mm (2”) diameter; with 6 bearing wheels and twist lock.